日本道精品一区二区三区,亚洲黄色一区,四川少妇一级毛片,欧美性战A久久久

<=""> <=":宋體;:12>新購買的螺旋板式換熱器<=":宋體;:12>現已裝好成一個全體，<=":宋體;:12>能全體<=":宋體;:12>進行裝置。<=":宋體;:12>若非必要，不<=":宋體;:12>應該拆開。螺旋板式換熱器的拆開<=":宋體;:12>與再裝置是<=":宋體;:12>比較詳盡的作業，<=":宋體;:12>需要由有經歷的人員<=":宋體;:12>依照必定的規矩進行，<=":宋體;:12>這其實也便是為了確保裝置<=":宋體;:12>之后密封杰出，<=":宋體;:12>能夠正常<=":宋體;:12>進行運用。<=":宋體;:12>

<=""> <=":宋體;:12>

<=""> <=":宋體;:12>關于螺旋板式換熱器不正確的裝拆<=":宋體;:12>與裝置<=":宋體;:12>也便是會形成密封不良<=":宋體;:12>會導致板片變形損壞，難以康復<=":宋體;:12>；螺旋板式換熱器在<=":宋體;:12>進行拆開之前<=":宋體;:12>有必要是要用鋼尺丈量板片組本來的厚度，<=":宋體;:12>應應當別離在設備的上下左右四角別離<=":宋體;:12>去進行丈量<=":宋體;:12>之后再做好記載。<=":宋體;:12>且在<=":宋體;:12>進行再裝置<=":宋體;:12>的時分，應該是要盡或許康復這一厚度。<=":宋體;:12>這時分能增減板片數量，<=":宋體;:12>應該先算出正確的總厚度。<=":宋體;:12>

<=""> <=":宋體;:12>

<=""> <=":宋體;:12>舉個比如來講，<=":宋體;:12>就螺旋板式換熱器<=":宋體;:12>上用<>80×(３．８+0<><><><>1%，上例厚度<>><=":宋體;:12>

<=""> <=":宋體;:12>

<=""> <=":宋體;:12>螺旋板式換熱器<=":宋體;:12>一般來講也便是會用<=":宋體;:12>進行裝拆<=":宋體;:12>的時分，這些螺栓<=":宋體;:12>應該均勻平衡地上緊<=":宋體;:12>或者是放松，決不可松緊不勻<=":宋體;:12>；在<=":宋體;:12>進行拆開放松螺栓<=":宋體;:12>的時分，<=":宋體;:12>應該先放松中部螺栓，<=":宋體;:12>之后到四角。初時<=":宋體;:12>應該每次<=":宋體;:12>會多<=":宋體;:12>一些，重復屢次<=":宋體;:12>到徹底松開。要求<=":宋體;:12>在放松進程<=":宋體;:12>傍邊，在四角丈量板片總厚度，左右誤差不<=":宋體;:12>能夠超越<>25><=":宋體;:12>

<=""> <=":宋體;:12>

<=""> <=":宋體;:12>螺旋板式換熱器在上緊螺栓<=":宋體;:12>的時分，<=":宋體;:12>應該先上緊四角螺栓，再上緊中部螺栓，逐小進行，<=":宋體;:12>這樣重復屢次。要求上緊進程<=":宋體;:12>傍邊板片組總厚度的不對稱誤差亦不<=":宋體;:12>應該超越上述數值。裝拆螺旋板式換熱器<=":宋體;:12>上的螺栓<=":宋體;:12>應應當用必定長度的扳手，使施加的力矩<=":宋體;:12>堅持恰當。<=":宋體;:12>

<=""> <=":宋體;:12>

<=""> <=":宋體;:12>【關鍵詞】<=":宋體;:12>螺旋板式換熱器<=":宋體;:12>

<=""> <=":宋體;:12>無錫天利生物化工設備廠<=":宋體;:12>